Neakasa NoMo N3 FAQ
Neakasa APP instruction, including share, no-go zone function.
Please watch the below tutorial video for reference:
https://www.youtube.com/watch?v=aKDxsiF-rIU
Is it possible to clean both the first floor and the second floor?
Nekasa N3 robot can save up to 3 maps in total, which makes multi-floor cleaning possible.
As long as maps are created and saved, you can just move the robot to a different floor where the map has been saved and start cleaning
automatically.
The no-go zone disappears.
a. Select "Map manager", and use the historical map.
b. Re-building the map, reset the no-go zone.
If those steps do not work, please contact us via support@neakasa.com with below information: ①Order number ②Photo or Video that shows the problem ③SN number of the robot(Remove the dust box)
Robot with no voice broadcast.
a. Turn off no-disturb mode in APP.
b. Turn on the voice.
c. Restore to factory settings.
If the above steps do not work, please contact us via support@neakasa.com with the information: ①Order number ②Photo or Video that shows the problem ③SN number of the robot(Remove the dust box)
Neakasa Powerscrub II FAQ
Streaks are left after cleaning using PowerScrub II.
Please check and clean the dust scraper.
If it still fails to resolve the issue, please contact us via support@neakasa.comwith below information: ①Order number ②Photo or Video that shows the problem ③ Nameplate of the PowerScrub II vacuum.
When charging, there is no any display.
Please kindly check whether the contact electrode between the battery and the machine is bent or rusty.
If the above steps do not work, please contact us via support@neakasa.com with the below information: ①Order number ②Photo or video that shows the problem ③ Nameplate of the product.
The device can open, the rolling brush does not rotate.
Please open the roller cover to check whether the roller brush is in place.
If it still fails to resolve the issue, please contact us via support@neakasa.com with below information: ①Order number ②Photo or Video that shows the problem ③ Nameplate of the product.
Can I buy some accessories in your store?
We offer a brush x 1, HEPA x 1.
Please kindly check this link: https://neakasa.com/collections/neakasa-powerscrub-ii-accessories/products/roller-brush-and-hypa-kit-for-neakasa-powerscrub-ii
Battery link: https://neakasa.com/collections/neakasa-powerscrub-ii-accessories/products/replacement-battery-for-neakasa-powerscrub-ii
How to remove the handle of the Wet Dry Vacuum II?
Please watch the below tutorial video for reference:
https://www.youtube.com/shorts/CQazeEH8PA8
If the above steps do not work, please contact us via support@neakasa.com with the below information:①Order number ②Photo or video that shows the problem ③ Nameplate of the product.
The vacuum battery has overheated.
After the battery is cooled, use it again. This problem may be caused by too long use.
If it still fails to resolve the issue, please contact us via support@neakasa.com with below information: ①Order number ②Photo or Video that shows the problem ③ Nameplate of the product.
The sewage tank leak water.
The sewage tank is not installed in place, leaving a gap.
When the sewage tank is loaded into the floor washing machine, it will be difficult to load in.
Check whether the head is installed in place, and you cannot leave a gap.
If it still fails to resolve the issue, please contact us via support@neakasa.com with below information: ①Order number ②Photo or Video that shows the problem ③ Nameplate of the product.
What type of cleaning agent can be added.
Can't add a cleaning agent that will produce foam.
Add a cleaning agent that will produce foam. When self -cleaning, it is easy to be blown by the fan because the foam itself is basically no weight.
Rollbrush does not rotate.
Remove the hair wrapped around the brush and restart the machine.
If the above steps do not work, please contact us via support@neakasa.com with the below information:①Order number ②Photo or video that shows the problem ③ Nameplate of the product.
I wanna know of it is ok to add floor cleaning solution into the Powerscrub II Wet Dry Vacuum?
The cleaning solution should be low foam, otherwise, the foam generated will be sprayed outside the sewage tank when the floor washer is self-cleaning.